VSF35EP70 VCA
Series

Versatile double stage worm screw + planetary gearmotors

Versatility

Wide range of reduction ratios up to 1:3675.

Strength

Designed for torque transmission up to 60 Nm.

Long life

Constant high quality is guaranteed by fully internalised production.

No maintenance required

Lubricated for life with special long-life grease.

Single-phase or three-phase AC motors. Power up to 0.09kW and voltages from 12 to 170 volts.

vite senza fine e epicicloidale vsf35ep70 ac Automec Srl Milano vite senza fine e epicicloidale vsf35ep70 ac Automec Srl Milano vite senza fine e epicicloidale vsf35ep70 ac Automec Srl Milano vite senza fine e epicicloidale vsf35ep70 ac Automec Srl Milano vite senza fine e epicicloidale vsf35ep70 ac Automec Srl Milano vite senza fine e epicicloidale vsf35ep70 ac Automec Srl Milano vite senza fine e epicicloidale vsf35ep70 ac Automec Srl Milano vite senza fine e epicicloidale vsf35ep70 ac Automec Srl Milano vite senza fine e epicicloidale vsf35ep70 ac Automec Srl Milano vite senza fine e epicicloidale vsf35ep70 ac Automec Srl Milano vite senza fine e epicicloidale vsf35ep70 ac Automec Srl Milano vite senza fine e epicicloidale vsf35ep70 ac Automec Srl Milano vite senza fine e epicicloidale vsf35ep70 ac Automec Srl Milano vite senza fine e epicicloidale vsf35ep70 ac Automec Srl Milano vite senza fine e epicicloidale vsf35ep70 ac Automec Srl Milano vite senza fine e epicicloidale vsf35ep70 ac Automec Srl Milano

AUTOMEC VSF35EP70 gearmotor offers, due to the centre distance from worm and screw of 35 mm and the planetary EP70 stage, a wide range of reduction ratios up to 1:3675 together with a high reliability for torque transmission up to 60 Nm for continuous operation conditions. It consists in a.c. mono or three phases motors with power up to 0.09 kW – 12 to 170 volts, and a worm screw gearunit made with a aluminium bronze worm and steel screwn directly coupled on the motor shaft, coupled with one or more output planetary stages. The output shaft is supported on double sealed ball bearings allowing to support high radial load and not allowing the lubricant leakage. All gearunit of this serie are supplied lifetime lubricated by means of special long life grease, and don’t require any further lubrication or servicing. As an option there are special coupling flange or feet mounting device available. lt is available an optional declutching mechanism of the output shaft which allows the manual emergency operation of the device when feeding is missing.

Made in Italy Automec
Automec CE certified

Choose your model

VSF35EP70/45W:

VSF35EP70/90W:

Other gearmotors that may interest you:

Looking for a custom-made gearmotor? Fill the form.

Do you need a standard gearmotor? Visit our shop.