VSF25
Series

Ultra-compact worm screw gearmotors

Compactness

Centre distance from worm and screw of only 25 mm.

Strength

Support the transmission of high radial loads.

Long life

Constant high quality is guaranteed by fully internalised production.

No maintenance required

Lubricated for life with special long-life grease.

45 to 90 watts - 12 to 170 volts d.c. permanent magnet motor.

vite senza fine vsf25 cc Automec Srl Milano vite senza fine vsf25 cc Automec Srl Milano vite senza fine vsf25 cc Automec Srl Milano vite senza fine vsf25 cc Automec Srl Milano vite senza fine vsf25 cc Automec Srl Milano vite senza fine vsf25 cc Automec Srl Milano vite senza fine vsf25 cc Automec Srl Milano vite senza fine vsf25 cc Automec Srl Milano vite senza fine vsf25 cc Automec Srl Milano vite senza fine vsf25 cc Automec Srl Milano vite senza fine vsf25 cc Automec Srl Milano vite senza fine vsf25 cc Automec Srl Milano vite senza fine vsf25 cc Automec Srl Milano vite senza fine vsf25 cc Automec Srl Milano vite senza fine vsf25 cc Automec Srl Milano vite senza fine vsf25 cc Automec Srl Milano

AUTOMEC VSF25 gearmotor is the most compact in this serie and offers, thanks to the centre distance from worm and screw of only 25 mm the best compromise between compact size and high reliability also for continuous operation conditions. It consist of a 45 to 90 watts – 12 to 170 volts d.c. permanent magnet motor, coupled with a worm screw gearunit made with a aluminium bronze worm and steel screw, directly coupled on the motor shaft. The output shaft is supported on sealed ball bearings allowing to support high radial load and not allowing the lubricant leakage. All gearunit of this series are supplied lifetime lubricated by means of special long life grease, and don’t require any further lubrication or servicing.

ALSO AVAILABLE IN AC
Made in Italy Automec
Automec CE certified

VSF25 Optional

In order to increase the versatility of the AUTOMEC VSF gearmotors, it is available a range of fixing devices which make the coupling of those gearmotors more flexible and easy. It is available a flange for fixing the gearmotor concentrically to the output shaft and a base fixing in order to allow the foot mounting.

Choose your model

VSF25/45W:

REQUEST FORM

VSF25/90W:

REQUEST FORM
  PDF SHEET  
PDF CATALOGUE

Other gearmotors that may interest you:

ALL PRODUCTS
EP7090 Series
VSF35 Series

Looking for a custom-made gearmotor? Fill the form.

CUSTOM

Do you need a standard gearmotor? Visit our shop.

SHOP