EP70
Series

Extra-versatile planetary gearmotors

Extreme temperatures

Special lubricant, specific for adverse temperatures.

Versatility

Our most versatile gearmotor with a wide range of reduction ratios.

Long life

Constant high quality is guaranteed by fully internalised production.

No maintenance required

Lubricated for life with special long-life grease.

45 to 120 watts - 12 to 170 volts d.c. permanent magnet motor

motoriduttore ep70 corrente continua Automec Srl Milano

The gearmotor type EP70 consist of a 45 to 120 watts – 12 to 170 volts d.c. permanent magnet motor; coupled with a planetary gearunit designed to drive output torque up to 60 Nm for continuous operation conditions. This is our most versatile gearmotor and offers, together with a wide range of reduction ratios, an extremely compact size and a high robustness for torque transmission up to 60 Nm into continuous operation conditions. Gear body is manufactured with self lubricating sintered steel, which offers the best mechanical characteristics together with a higher life expectation, and gears are manufactured, depending on the requested torque, with plastic materials, sintered steel or high resistance hardened steel. EP70 gearmotor is supplied lifetime lubricated by means of special long life grease, and don’t require any further lubrication or servicing.

Choose your model

EP70/45W

Table:

Reduction stagesNumber of gear sets to increase the reduction	Efficiencydifference between applied power and output power after reduction	Reduction ratioratio between input and output revolutions	Output speed (RPM)gearmotor output revolutions	Length (mm)gearmotor length	Nominal torque (Nm)power and load capacity of the gearmotor	Dynamical axial load (N)maximum load that can be applied to the gearmotor shaft	Dynamical radial load (N)maximum load that can be applied at bearing level
1	0,9	4,43	632	204	0,5	1000	5590
1	0,9	7	400	204	0,8	1000	5590
1	0,9	9	311	204	1	1000	5590
2	0,81	18	156	221	1,7	1000	5590
2	0,81	22	127	221	2,1	1000	5590
2	0,81	28	100	221	2,7	1000	5590
2	0,81	31	90	221	3	1000	5590
2	0,81	35	80	221	3,4	1000	5590
2	0,81	49	57	221	4,8	1000	5590
2	0,81	63	44	221	6,1	1000	5590
3	0,73	71	39	239	6,2	1000	5590
3	0,73	89	31	239	7,8	1000	5590
3	0,73	112	25	239	9,8	1000	5590
3	0,73	124	23	239	10,8	1000	5590
3	0,73	140	20	239	12,2	1000	5590
3	0,73	155	18,1	239	13,6	1000	5590
3	0,73	175	16	239	15,3	1000	5590
3	0,73	196	14,3	239	17,1	1000	5590
3	0,73	245	11,4	239	21,4	1000	5590
3	0,73	343	8,2	239	30	1000	5590
4	0,66	448	6,3	256	35,3	1000	5590
4	0,66	496	5,6	256	39,1	1000	5590
4	0,66	560	5	256	44,1	1000	5590
4	0,66	620	4,5	256	44,8	1000	5590
4	0,66	700	4	256	55,1	1000	5590
4	0,66	784	3,6	256	60	1000	5590
4	0,66	875	3,2	256	60	1000	5590
4	0,66	980	2,9	256	60	1000	5590
4	0,66	1085	2,6	256	60	1000	5590
4	0,66	1225	2,3	256	60	1000	5590
4	0,66	1372	2	256	60	1000	5590
4	0,66	1519	1,8	256	60	1000	5590
4	0,66	1715	1,6	256	60	1000	5590
4	0,66	2401	1,2	256	60	1000	5590
5	0,59	1985	1,4	274	60	1000	5590
5	0,59	2197	1,3	274	60	1000	5590
5	0,59	2481	1,1	274	60	1000	5590
5	0,59	2747	1	274	60	1000	5590
5	0,59	3101	0,9	274	60	1000	5590
5	0,59	3136	0,89	274	60	1000	5590
5	0,59	3472	0,81	274	60	1000	5590
5	0,59	3876	0,72	274	60	1000	5590
5	0,59	3920	0,71	274	60	1000	5590
5	0,59	4032	0,69	274	60	1000	5590
5	0,59	4340	0,65	274	60	1000	5590
5	0,59	4464	0,63	274	60	1000	5590
5	0,59	4807	0,58	274	60	1000	5590
5	0,59	4900	0,57	274	60	1000	5590
5	0,59	5040	0,56	274	60	1000	5590
5	0,59	5427	0,52	274	60	1000	5590
5	0,59	5488	0,51	274	60	1000	5590
5	0,59	5580	0,5	274	60	1000	5590
5	0,59	6078	0,46	274	60	1000	5590
5	0,59	6125	0,46	274	60	1000	5590
5	0,59	6300	0,44	274	60	1000	5590
5	0,59	6729	0,42	274	60	1000	5590
5	0,59	6860	0,41	274	60	1000	5590
5	0,59	7056	0,4	274	60	1000	5590
5	0,59	7595	0,37	274	60	1000	5590
5	0,59	7875	0,36	274	60	1000	5590
5	0,59	8575	0,33	274	60	1000	5590
5	0,59	8820	0,32	274	60	1000	5590
5	0,59	9604	0,29	274	60	1000	5590
5	0,59	9765	0,29	274	60	1000	5590
5	0,59	10633	0,26	274	60	1000	5590
5	0,59	11025	0,25	274	60	1000	5590
5	0,59	12005	0,23	274	60	1000	5590
5	0,59	12348	0,23	274	60	1000	5590
5	0,59	13671	0,2	274	60	1000	5590
5	0,59	15435	0,18	274	60	1000	5590
5	0,59	16807	0,17	274	60	1000	5590
5	0,59	21609	0,13	274	60	1000	5590

EP70/90W

Table:

Reduction stagesNumber of gear sets to increase the reduction	Efficiencydifference between applied power and output power after reduction	Reduction ratioratio between input and output revolutions	Output speed (RPM)gearmotor output revolutions	Length (mm)gearmotor length	Nominal torque (Nm)power and load capacity of the gearmotor	Dynamical axial load (N)maximum load that can be applied to the gearmotor shaft	Dynamical radial load (N)maximum load that can be applied at bearing level
1	0,9	4	700	237	0,9	1000	5590
1	0,9	7	400	237	1,5	1000	5590
1	0,9	9	311	237	1,9	1000	5590
2	0,81	18	156	254	3,5	1000	5590
2	0,81	22	127	254	4,3	1000	5590
2	0,81	28	100	254	5,4	1000	5590
2	0,81	31	90	254	6	1000	5590
2	0,81	35	80	254	6,8	1000	5590
2	0,81	49	57	254	9,5	1000	5590
2	0,81	63	44	254	12,2	1000	5590
3	0,73	71	39	272	12,4	1000	5590
3	0,73	89	31	272	15,6	1000	5590
3	0,73	112	25	272	19,6	1000	5590
3	0,73	124	23	272	21,7	1000	5590
3	0,73	140	20	272	24,5	1000	5590
3	0,73	155	18,1	272	27,1	1000	5590
3	0,73	175	16	272	30,6	1000	5590
3	0,73	196	14,3	272	34,3	1000	5590
3	0,73	245	11,4	272	42,9	1000	5590
3	0,73	343	8,2	272	60	1000	5590
4	0,66	448	6,3	289	60	1000	5590
4	0,66	496	5,6	289	60	1000	5590
4	0,66	560	5	289	60	1000	5590
4	0,66	620	4,5	289	60	1000	5590
4	0,66	700	4	289	60	1000	5590
4	0,66	784	3,6	289	60	1000	5590
4	0,66	875	3,2	289	60	1000	5590
4	0,66	980	2,9	289	60	1000	5590
4	0,66	1085	2,6	289	60	1000	5590
4	0,66	1225	2,3	289	60	1000	5590
4	0,66	1372	2	289	60	1000	5590
4	0,66	1519	1,8	289	60	1000	5590
4	0,66	1715	1,6	289	60	1000	5590
4	0,66	2401	1,2	289	60	1000	5590

EP70/120W

Table:

Reduction stagesNumber of gear sets to increase the reduction	Efficiencydifference between applied power and output power after reduction	Reduction ratioratio between input and output revolutions	Output speed (RPM)gearmotor output revolutions	Length (mm)gearmotor length	Nominal torque (Nm)power and load capacity of the gearmotor	Dynamical axial load (N)maximum load that can be applied to the gearmotor shaft	Dynamical radial load (N)maximum load that can be applied at bearing level
1	0,9	4	700	237	1,3	1000	5590
1	0,9	7	400	237	2,3	1000	5590
1	0,9	9	311	237	2,9	1000	5590
2	0,81	18	156	254	5,2	1000	5590
2	0,81	22	127	254	6,4	1000	5590
2	0,81	28	100	254	8,2	1000	5590
2	0,81	31	90	254	9	1000	5590
2	0,81	35	80	254	10,2	1000	5590
2	0,81	49	57	254	14,3	1000	5590
2	0,81	63	44	254	18,4	1000	5590
3	0,73	71	39	272	18,6	1000	5590
3	0,73	89	31	272	23,4	1000	5590
3	0,73	112	25	272	29,4	1000	5590
3	0,73	124	23	272	32,5	1000	5590
3	0,73	140	20	272	36,7	1000	5590
3	0,73	155	18,1	272	40,7	1000	5590
3	0,73	175	16	272	45,9	1000	5590
3	0,73	196	14,3	272	51,4	1000	5590
3	0,73	245	11,4	272	60	1000	5590
3	0,73	343	8,2	272	60	1000	5590

EP70
Series

Extra-versatile planetary gearmotors

Extreme temperatures

Versatility

Long life

No maintenance required

45 to 120 watts - 12 to 170 volts d.c. permanent magnet motor

Choose your model

EP70/45W

EP70/90W

EP70/120W

Other gearmotors that may interest you:

Series EP35 Gearmotors

Series EP45 Gearmotors

Series EP65 Gearmotors

Series EP7090 Gearmotors

Series EP45 Gearmotors

Series EP65 Gearmotors

Series EP7090 Gearmotors

Looking for a custom-made gearmotor? Fill the form.

Do you need a standard gearmotor? Visit our shop.

Recent Posts

EP70Series

Extra-versatile planetary gearmotors

Extreme temperatures

Versatility

Long life

No maintenance required

45 to 120 watts - 12 to 170 volts d.c. permanent magnet motor

Choose your model

EP70/45W

EP70/90W

EP70/120W

Other gearmotors that may interest you:

Looking for a custom-made gearmotor? Fill the form.

Do you need a standard gearmotor? Visit our shop.

Recent Posts

EP70
Series