A.C. Worm Screw Gearmotors

AUTOMEC worm screw gearmotors type VSF25 VCA and VSF35 VCAare designed for all those applications requiring the output shaft at 90° respect the input shaft, where it is important the high resistance to fatigue, the compact size and the noiseless operation. All the gearmotors of this serie are manufactured with aluminum bronze worms and steel screws; output shafts are supported on ball bearings with seal rings in order to avoid the leak of lubricant.
All the gear unit of this serie are supplied lifetime lubricated by means of special long life grease, and don’t require any further lubrication or servicing.

Series VSF25 VCA Gearmotors

VSF25 VCA Series

If you're looking for compactness

The most compact of this serie, centre distance from worm and screw of only 25 mm.
Best compromise between compact size and high reliability.
A.C. mono or three phases motors with power up to 0.12 kW and voltages from 12 to 170 volts.
Worm screw gearunit made with a aluminium bronze worm and steel screw, directly coupled on the motor shaft.
Sealed ball bearings.
Long life expectation, no servicing needed.

Series VSF35 VCA Gearmotors

VSF35 VCA Series

If you are looking for versatility

Centre distance from worm and screw of 35 mm.
Higher versatility into reduction ratio with a higher torque.
Compact size
High reliability
A.C. mono or three phases motors with power up to 0.12 kW and voltages from 12 to 170 volts.
Worm screw gear unit made with a aluminium bronze worm and steel screw.
Sealed ball bearings.
Long life expectation, no servicing needed.